Use the following procedure to switch the Reverb On/Off:
1. Power-on the HP-126 while holding down the Right pedal. This will put the HP-126 in the Function Mode.
2. Press note [D#2] to switch the reverb On and Off.
Refer to the Owner's Manual p. 9, for Reverb settings.
1. Power-on the HP-126 while holding down the Right pedal. This will put the HP-126 in the Function Mode.
2. Press note [D#2] to switch the reverb On and Off.
Refer to the Owner's Manual p. 9, for Reverb settings.