M-480: How to Setup an M-480 as FOH and an M-480 as a Broadcasting Mixer
AeroCaster Switcher: Devices Compatible with the AeroCaster Switcher App
AeroCaster Switcher: Devices on which the AeroCaster Switcher app can be activated
AeroCaster Switcher: Does the AeroCaster Switcher app need to be activated every time it’s launched?
AeroCaster Switcher: How many screen layouts (scenes) can I register at maximum?
AeroCaster Switcher: How to Output an HDMI Signal from an iPad on which AeroCaster Switcher is being used
AeroCaster Switcher: How to Use Still Images or Videos Saved On an iPad as a Video Source
AeroCaster Switcher: I can’t activate the AeroCaster Switcher app.
AeroCaster Switcher: I can’t output an HDMI signal from the AeroCaster Switcher app.
AeroCaster Switcher: I can’t share my smartphone’s screen.

See more

VM-3100PRO, VM-3100: Setting Parameters to be Saved in Scenes

April 14, 2023 02:58
Updated

Use the following procedure to set which parameters are to be saved in scenes:

1. Press BANK, then press F1 (PREF).

2. Use the CURSOR buttons to select desired parameter(s), then turn VALUE dial clockwise to enable, counter-clockwise to disable.

3. When finished, press the LEVEL/METER button.