MT-300, MT-300S: Using the MT-300/S as a Sound Module

Use the following procedure to set up the MT-300/S to be
used with an external sequencer or MIDI controller:

1. Power off and set the computer switch on the rear of the MT-300/S to MIDI.

2. Connect a MIDI cable from the MIDI OUT of your MIDI controller to the MIDI IN of the MT-300/S.

3. Turn on the power of the MT-300/S.

4. Press 16 TRACK/SOUND.

5. Play your MIDI controller or sequencer.

6. Use the BEAT and TEMPO buttons to select a part.

7. Press TRANSPOSE and use the VALUE DIAL to select a sound.

8. Press TRANSPOSE to exit.