Use the following procedure to apply phantom power to inputs 1 and 2:
1) Press SYSTEM.
2) Press the DOWN CURSOR to select "Phantom."
3) Rotate the VALUE dial to select "ON."
*Turn the Phantom Power setting to "OFF" when a device that does not require
phantom power is connected to INPUT 1 or 2.
1) Press SYSTEM.
2) Press the DOWN CURSOR to select "Phantom."
3) Rotate the VALUE dial to select "ON."
*Turn the Phantom Power setting to "OFF" when a device that does not require
phantom power is connected to INPUT 1 or 2.