A length of 1-999 can be selected for a User pattern. The length number is equal to one measure; i.e. a length of 2 would be equal to a 2 measure pattern. Use the following procedure to change the length of a user pattern:
1. Select a USER pattern.
2. Press the Parameter right button 3 times to select "LENGTH."
3. Turn the VALUE dial to select a desired length.
4. Press WRITE twice.
1. Select a USER pattern.
2. Press the Parameter right button 3 times to select "LENGTH."
3. Turn the VALUE dial to select a desired length.
4. Press WRITE twice.