Use the following procedure to select the Transmit Midi Channel when in Patch
Mode:
1) Press PATCH so it is lit.
2) Press SYSTEM so it is lit.
3) Press the PART 7/16 button below the display so it is lit.
4) Use the CURSOR < / > buttons to select CHANNEL.
5) Use the VALUE DIAL to select a transmit MIDI channel.
Mode:
1) Press PATCH so it is lit.
2) Press SYSTEM so it is lit.
3) Press the PART 7/16 button below the display so it is lit.
4) Use the CURSOR < / > buttons to select CHANNEL.
5) Use the VALUE DIAL to select a transmit MIDI channel.