When the Status buttons of any pair of tracks go out when you arm another pair of tracks, that means you have routed tracks to themselves. There are two quick ways to clear this.
First Press the Play/Display button and make sure your Master Fader Edit button is green.
1. Press and hold the Status button(s) for the track(s) you are trying to record to. The screen will flash *** Assign ***. The Select button(s) directly above them should blink green.
2. Press the Select button(s) to turn it off and clear the routing.
To clear all track to track routings:
1. Press and hold any Status button. The screen will flash
*** Assign ***.
2. Press the Clear button in the Locator section to clear all track mixer routings.
First Press the Play/Display button and make sure your Master Fader Edit button is green.
1. Press and hold the Status button(s) for the track(s) you are trying to record to. The screen will flash *** Assign ***. The Select button(s) directly above them should blink green.
2. Press the Select button(s) to turn it off and clear the routing.
To clear all track to track routings:
1. Press and hold any Status button. The screen will flash
*** Assign ***.
2. Press the Clear button in the Locator section to clear all track mixer routings.