When the Status button of any track blinks red and green, that means you have routed a track back to itself. There are two quick ways to clear this.
First Press the Play/Display button and make sure your Master Fader Edit button is green.
1. Press and hold the Status button for the track you are trying to record to. The screen will flash *** Assign ***
and the Select button directly above it should blink green.
2. Press the Select button to turn it off and clear the routing.
To clear all track to track routings:
1. Press and hold any Status button. The screen will flash
*** Assign ***.
2. Press the Clear button in the Locator section to clear all track mixer routings.
First Press the Play/Display button and make sure your Master Fader Edit button is green.
1. Press and hold the Status button for the track you are trying to record to. The screen will flash *** Assign ***
and the Select button directly above it should blink green.
2. Press the Select button to turn it off and clear the routing.
To clear all track to track routings:
1. Press and hold any Status button. The screen will flash
*** Assign ***.
2. Press the Clear button in the Locator section to clear all track mixer routings.