Use the following procedure to select a sound in a MIDI sound module from the AX-7:
1. Press the PRG CHG button so its lit. While the display is flashing, use the DOWN and UP buttons to select Pc.
2. Press the KEYBOARD MODE LOWER or UPPER button to select the desired zone.
3. Use the buttons numbered 0-9, followed by ENTER, to select the desired program change number. For example, to select 114, press 1, 1 and 4, followed by ENTER.
Note: The AX-7 defaults to General MIDI settings, so if you have a GM-compatible sound module, the AX-7 will select its GM sounds without any special setup.
1. Press the PRG CHG button so its lit. While the display is flashing, use the DOWN and UP buttons to select Pc.
2. Press the KEYBOARD MODE LOWER or UPPER button to select the desired zone.
3. Use the buttons numbered 0-9, followed by ENTER, to select the desired program change number. For example, to select 114, press 1, 1 and 4, followed by ENTER.
Note: The AX-7 defaults to General MIDI settings, so if you have a GM-compatible sound module, the AX-7 will select its GM sounds without any special setup.