You can select the RBUS OUT of your tracks to various SI-24 outputs. When you select the output of your tracks to any combination of either RBUS OUT 1/2, 3/4, 5/6 or 7/8. They are set up in the following manner:
Assigning tracks to RBUS OUT 1/2 sends the MASTER L/R to the Master out as well as the Master Digital Out.
Assigning tracks to RBUS OUT 3/4 are directed to AUX-1
(1/4 inch) outputs from the SI-24.
Assigning tracks to RBUS OUT 5/6 are directed to AUX-2 which are the RCA outputs on the SI-24.
Assigning tracks to RBUS OUT 7/8 create a way to bus directly to the DIGITAL OUT.
1- Hold SYSTEM and press the (7/8>D.OUT) button so that it is lit in order for the Digital out to use RBUS OUT 7/8 instead of routing the RBUS 1/2 out the Digital Out.
Assigning tracks to RBUS OUT 1/2 sends the MASTER L/R to the Master out as well as the Master Digital Out.
Assigning tracks to RBUS OUT 3/4 are directed to AUX-1
(1/4 inch) outputs from the SI-24.
Assigning tracks to RBUS OUT 5/6 are directed to AUX-2 which are the RCA outputs on the SI-24.
Assigning tracks to RBUS OUT 7/8 create a way to bus directly to the DIGITAL OUT.
1- Hold SYSTEM and press the (7/8>D.OUT) button so that it is lit in order for the Digital out to use RBUS OUT 7/8 instead of routing the RBUS 1/2 out the Digital Out.