There are 99 user locations to store your own patches. Use the following procedure to save a patch:
1. Select a desired Patch.
2. Edit or change the patch as desired.
3. Press WRITE.
4. Turn the VALUE dial to select the desired patch number (1-99) to store the changes to.
5. Press WRITE.
Note: Do not turn the power off at this time.
1. Select a desired Patch.
2. Edit or change the patch as desired.
3. Press WRITE.
4. Turn the VALUE dial to select the desired patch number (1-99) to store the changes to.
5. Press WRITE.
Note: Do not turn the power off at this time.