You can use the built-in equalizer to adjust the FP-2s tonal quality. Start by turning the equalizer to on.
1. Press EQUALIZER.
2. While holding down DISPLAY, press the - button so the display shows Fnc.
3. Press the flashing EQUALIZER button.
4. While holding down the EQUALIZER, use the + and - buttons to select the desired EQ parameter.
Note: The available EQ parameters are listed on Page 44 of the FP-2 Owners Manual.
5. Release the EQUALIZER button and use + and - to adjust the select parameters value.
6. Press DISPLAY to exit Function mode.
1. Press EQUALIZER.
2. While holding down DISPLAY, press the - button so the display shows Fnc.
3. Press the flashing EQUALIZER button.
4. While holding down the EQUALIZER, use the + and - buttons to select the desired EQ parameter.
Note: The available EQ parameters are listed on Page 44 of the FP-2 Owners Manual.
5. Release the EQUALIZER button and use + and - to adjust the select parameters value.
6. Press DISPLAY to exit Function mode.