Locate marks are useful for accessing areas of a composition quickly and
repeatedly. Use the following procedure to do this:
Note: The sequencer must be stopped.
1) Press LOCATE.
2) Use the 10 key pad to select a Locate mark number.
3) Press ENTER.
Note: [1] Pressing the ENTER button will transport you to the specified
Location mark. [2] Jumping to a Locate mark is not possible during playback or
recording.
repeatedly. Use the following procedure to do this:
Note: The sequencer must be stopped.
1) Press LOCATE.
2) Use the 10 key pad to select a Locate mark number.
3) Press ENTER.
Note: [1] Pressing the ENTER button will transport you to the specified
Location mark. [2] Jumping to a Locate mark is not possible during playback or
recording.