Changing Patches on the TD-7 will send MIDI program change messages to any
connected MIDI device. Program change messages sent to the TD-7 will cause the
TD-7 to change Patches. However, when OFF is selected, no messages will be sent
or received. Use the following procedure to assign a program change message to
a Patch:
1) Press EDIT.
2) Use the CURSOR buttons [< or >] to select Patch, then press ENTER.
3) Use the CURSOR buttons [< or >] to select PGM, then press ENTER.
4) Use the CURSOR buttons [< or >] to select the value field, then use the
VALUE dial to select the desired program change number.
5) Press EXIT several times to return to the play screen.
connected MIDI device. Program change messages sent to the TD-7 will cause the
TD-7 to change Patches. However, when OFF is selected, no messages will be sent
or received. Use the following procedure to assign a program change message to
a Patch:
1) Press EDIT.
2) Use the CURSOR buttons [< or >] to select Patch, then press ENTER.
3) Use the CURSOR buttons [< or >] to select PGM, then press ENTER.
4) Use the CURSOR buttons [< or >] to select the value field, then use the
VALUE dial to select the desired program change number.
5) Press EXIT several times to return to the play screen.