The DR-670 can be used as a master clock or can be slaved to an external MIDI device:
1. Hold SHIFT and press PAD 14/MIDI.
2. Use the buttons to select "MID SYNC" in the display and use the TEMPO/VALUE dial to select the desired setting.
AUTO: The DR-670 will normally function as the master, but will switch automatically to slave mode if it is stopped and senses a MIDI Start message from an external device.
INT: The DR-670 will function as the master.
MIDI: The DR-670 will function as a slave device.
3. Hold SHIFT and press PAD 5/PATTERN PLAY to return to the Pattern Play mode.
Note: Sync mode settings are not saved. The setting is always reset to "AUTO" when the DR-670 is turned off.
1. Hold SHIFT and press PAD 14/MIDI.
2. Use the buttons to select "MID SYNC" in the display and use the TEMPO/VALUE dial to select the desired setting.
AUTO: The DR-670 will normally function as the master, but will switch automatically to slave mode if it is stopped and senses a MIDI Start message from an external device.
INT: The DR-670 will function as the master.
MIDI: The DR-670 will function as a slave device.
3. Hold SHIFT and press PAD 5/PATTERN PLAY to return to the Pattern Play mode.
Note: Sync mode settings are not saved. The setting is always reset to "AUTO" when the DR-670 is turned off.