There are 28 different instruments to choose from in the RM-2. If two trigger pads are connected to each trigger input, a different instrument can be assigned to each pad/trigger. Use the following steps to change the instruments:
1. Press the SELECT button until the LED is flashing under "PAD INST".
2. Hit the RP-2 pad (or trigger pad) that's connected to the TRIG 1 input to audition the currently selected instrument.
3. Press the VALUE UP or DOWN buttons to choose the desired instrument (1-28). For a detailed list of each instrument, refer to the RMP-1 Owners Manual.
4. If an additional pad/trigger is connected to the TRIG 2 input, repeat steps 2-3.
3. When finished, press the SELECT button repeatedly until you return to the normal tempo display.
TIP: You can also return to the tempo display by holding down the SELECT button for at least two seconds.
1. Press the SELECT button until the LED is flashing under "PAD INST".
2. Hit the RP-2 pad (or trigger pad) that's connected to the TRIG 1 input to audition the currently selected instrument.
3. Press the VALUE UP or DOWN buttons to choose the desired instrument (1-28). For a detailed list of each instrument, refer to the RMP-1 Owners Manual.
4. If an additional pad/trigger is connected to the TRIG 2 input, repeat steps 2-3.
3. When finished, press the SELECT button repeatedly until you return to the normal tempo display.
TIP: You can also return to the tempo display by holding down the SELECT button for at least two seconds.