User patterns will remember which Drum Kit was used during the original pattern recording process. If you would like to change the existing Drum Kit that is being used in a User pattern, follow the steps below:
1. Select a User pattern (201-399).
2. Press the REAL/STEP button once.
3. Press KIT.
4. Turn the TEMPO DATA dial to select a desired KIT
(1-128).
5. Press START.
6. Press STOP.
The Kit is now stored into the pattern.
1. Select a User pattern (201-399).
2. Press the REAL/STEP button once.
3. Press KIT.
4. Turn the TEMPO DATA dial to select a desired KIT
(1-128).
5. Press START.
6. Press STOP.
The Kit is now stored into the pattern.