The sequencer in the TD-10 can be synchronized to any device that transmits MIDI clock. Use the following procedure to set the TD-10 to external sync:
1. With a MIDI cable, connect the MIDI OUT of the External device to the MIDI IN of the TD-10.
2. Press PATTERN.
3. Press F2 (FUNC).
4. Press F1 (GLOBAL).
5. Turn the VALUE dial to select "EXTERNAL."
Note: The pattern selected in the TD-10 will only start after receiving a "MIDI Clock" message. The external MIDI device determines the tempo and the TD-10 will follow in "sync" when you start or stop the external unit.
6. Press PATTERN to return to Pattern Play Mode.
1. With a MIDI cable, connect the MIDI OUT of the External device to the MIDI IN of the TD-10.
2. Press PATTERN.
3. Press F2 (FUNC).
4. Press F1 (GLOBAL).
5. Turn the VALUE dial to select "EXTERNAL."
Note: The pattern selected in the TD-10 will only start after receiving a "MIDI Clock" message. The external MIDI device determines the tempo and the TD-10 will follow in "sync" when you start or stop the external unit.
6. Press PATTERN to return to Pattern Play Mode.