If you are using the SE-50 primarily for the distortion and the compressor, you
should plug it
into the front of your amp and run the amp clean. These signal shaping effects
do not sound
good in an effects loop which is better suited for time delay effects like
reverb and chorus. If you
are using the SE-50 for these effects then you should place the unit in the
amps effects loop if
available.
should plug it
into the front of your amp and run the amp clean. These signal shaping effects
do not sound
good in an effects loop which is better suited for time delay effects like
reverb and chorus. If you
are using the SE-50 for these effects then you should place the unit in the
amps effects loop if
available.