The following procedure restores memories 1–4, the Pedal Mode setting, the Direct Sound ON/OFF setting, and the MEMORY Number Indication setting on the BOSS CE-20 to their factory defaults.
Note: This operation completely clears all settings currently stored in memories 1–4.
- Switch off the power.
- When running on battery power: Disconnect the connection plug from the INPUT R (MONO) jack.
- When running on power from an AC adaptor: Disconnect the plug from the AC ADAPTOR jack.
- While holding down the WRITE button, switch on the power.
Release the WRITE button.
The MEMORY Number indicators (1–4) flash.To cancel the operation, operate the MANUAL/MEMORY pedal or the EFFECT ON/OFF pedal before pressing the WRITE button. The CE-20 returns to its ordinary state.
Press the WRITE button.
The MEMORY Number indicators (1–4) begin flashing rapidly.
The settings are restored to their factory defaults, and the CE-20 returns to its ordinary state.The following settings are restored:
- Memory 1: SUPER RICH
- Memory 2: BASS STANDARD
- Memory 3: DEEP CHORUS
- Memory 4: CE-1
- Pedal Mode: 1
- Direct Sound ON/OFF: ON
- MEMORY Number Indication: Lighting Pattern 1