1. Confirm that the power is OFF on the GR-20.
2. Connect one end of the 13 pin cable to the GK-3 pickup. (or 13 pin receptacle on an RMC type pickup).
3. Connect the other end of the 13 pin cable to the “GK IN” on the GR-20.
4. With a standard guitar or instrument cable, connect the R (MONO) OUTPUT on the GR-20 to the INPUT on your amp, mixer or PA. Or connect your headphones to the L (PHONES) OUTPUT.
Note: No “Synth” sound comes out of the GUITAR OUT on the GR-20. Use the “GUITAR OUT” to carry your “dry” guitar signal to a different amp or effects processor if desired.
5. Now turn on the GR-20.
2. Connect one end of the 13 pin cable to the GK-3 pickup. (or 13 pin receptacle on an RMC type pickup).
3. Connect the other end of the 13 pin cable to the “GK IN” on the GR-20.
4. With a standard guitar or instrument cable, connect the R (MONO) OUTPUT on the GR-20 to the INPUT on your amp, mixer or PA. Or connect your headphones to the L (PHONES) OUTPUT.
Note: No “Synth” sound comes out of the GUITAR OUT on the GR-20. Use the “GUITAR OUT” to carry your “dry” guitar signal to a different amp or effects processor if desired.
5. Now turn on the GR-20.