There are 100 Preset Patterns in the TD-20s sequencer. Use the following steps to select and play them:
1. Press PATTERN so it's lit.
2. Turn the VALUE dial or use the INC+ / DEC- buttons to select a pattern.
3. Press PLAY.
4. Press STOP when finished.
Note: If you selected a TAP pattern, you must press the PLAY button repeatedly to play through the pattern.
1. Press PATTERN so it's lit.
2. Turn the VALUE dial or use the INC+ / DEC- buttons to select a pattern.
3. Press PLAY.
4. Press STOP when finished.
Note: If you selected a TAP pattern, you must press the PLAY button repeatedly to play through the pattern.