Track Move allows you to move a specific portion of audio from its original location to a different location.
To perform a track move using the AB REPEAT button to specify the start and end points of the audio to be moved, use the following procedure:
1. Press the AB REPEAT button at the start of the section that you want to move. The button will flash red.
2. Press the AB REPEAT button at the end of the section that you want to move. The button will turn solid red.
3. Press [UTILITY].
4. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
5. Press CURSOR [<] or [>] to move the cursor to "MOV", and press [ENTER].
6. Turn the TIME/VALUE dial to select "AB" and press [ENTER].
7. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to move from, and track/VTrack to move to.
8. Press [ENTER].
9. Use CURSOR [<] or [>] and the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the data to be moved.
10. When you are ready to execute the move, press [ENTER]. The display will ask "Are you sure?", so that you can confirm the operation.
11. Press [ENTER]. Move Event is executed.
12. Press [UTILITY],or [EXIT], repeatedly to return to the main screen.
To perform a track move using the AB REPEAT button to specify the start and end points of the audio to be moved, use the following procedure:
1. Press the AB REPEAT button at the start of the section that you want to move. The button will flash red.
2. Press the AB REPEAT button at the end of the section that you want to move. The button will turn solid red.
3. Press [UTILITY].
4. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
5. Press CURSOR [<] or [>] to move the cursor to "MOV", and press [ENTER].
6. Turn the TIME/VALUE dial to select "AB" and press [ENTER].
7. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to move from, and track/VTrack to move to.
8. Press [ENTER].
9. Use CURSOR [<] or [>] and the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the data to be moved.
10. When you are ready to execute the move, press [ENTER]. The display will ask "Are you sure?", so that you can confirm the operation.
11. Press [ENTER]. Move Event is executed.
12. Press [UTILITY],or [EXIT], repeatedly to return to the main screen.