Before installing a VS8F-3 make sure that the VS-2000CD's operating system is at least to version 1.5
To physically install the board use the following procedure:
- Power off and unplug the recorder.
- Using a Phillips screwdriver remove the 4 screws on the underside of the VS-2000CD that hold on the cover plate for the effects bay.
- Remove the cover plate.
- Grasp any grounded metal object to discharge any static electricity.
- Handling the board only by its edges, gently push back the white tab that locks the board in place and remove any expansion board that might currently occupy slot B.
- Handling the VS8F-3 board only by its edges press it into slot B.
Note: The VS8F-3 that you place into slot B will become your "Key Card." This Key Card will contain the authorization information that will be encoded when you install the various VS Plug Ins. - Replace the cover plate and screws.