JV-1080: Assigning Parts in a Performance to the Direct Outputs.

Use the following procedure to assign a Part in a Performance to the Direct outputs:

1. Press PERFORM.
2. Use the VALUE DIAL to select the Performance you wish to edit.
3. Use the CURSOR RIGHT or LEFT button to select a Part.
4. Press PARAMETER so it is lit.
5. Press TONE SWITCH #2 [EFFECTS].
6. Use the VALUE DIAL to select an "OUTPUT."
   Output Options:
   Mix: Primary Stereo Outputs
   EFX: Multi-Effect Processor. (Also routed to "Mix" output)
   OUTPUT1: Second set of outputs. (Stereo)
   OUTPUT2: Third set of outputs. (Stereo)
   PATCH: Copies the output settings of the current part's Patch.

Owner's Manual: https://www.roland.com/us/support/manual_archive/