Use the following procedure to layer two tones:
1. Press DUAL under KEYBOARD so it is lit.
2. Press UPPER so it is lit.
3. Use the TONE category buttons and the VALUE dial to select the UPPER instrument of the layer.
4. Press LOWER so it is lit.
5. Use the TONE category buttons and the VALUE dial to select the LOWER instrument of the layer.
6. Press and hold UPPER for approximately two seconds to display the volume setting screen for the upper part.
7. Turn the VALUE dial to adjust the volume of the upper part.
8. Press LOWER to display the volume setting screen for the lower part.
9. Turn the VALUE dial to adjust the volume of the lower part.
10. Press EXIT to return to the main display.
NOTE: You can't select a drum set Tone as the second Tone.
1. Press DUAL under KEYBOARD so it is lit.
2. Press UPPER so it is lit.
3. Use the TONE category buttons and the VALUE dial to select the UPPER instrument of the layer.
4. Press LOWER so it is lit.
5. Use the TONE category buttons and the VALUE dial to select the LOWER instrument of the layer.
6. Press and hold UPPER for approximately two seconds to display the volume setting screen for the upper part.
7. Turn the VALUE dial to adjust the volume of the upper part.
8. Press LOWER to display the volume setting screen for the lower part.
9. Turn the VALUE dial to adjust the volume of the lower part.
10. Press EXIT to return to the main display.
NOTE: You can't select a drum set Tone as the second Tone.