Any of the 99 patches can be custom-named with up to 16 characters. Use the following steps to name a patch:
1. Select the desired patch.
2. Press the NAME/PATCH button.
3. Press PARAMETER left or right (< >) to move the cursor to the first name character.
4. Turn the PATCH/VALUE dial to select the desired first character.
5. Press PARAMETER left or right (< >) to move the cursor to the next character.
6. Turn the PATCH/VALUE dial to select the desired character.
7. Repeat Steps 5-6 to enter the remaining characters of the name you want.
8. To save the patchs new name, press the WRITE button twice.
1. Select the desired patch.
2. Press the NAME/PATCH button.
3. Press PARAMETER left or right (< >) to move the cursor to the first name character.
4. Turn the PATCH/VALUE dial to select the desired first character.
5. Press PARAMETER left or right (< >) to move the cursor to the next character.
6. Turn the PATCH/VALUE dial to select the desired character.
7. Repeat Steps 5-6 to enter the remaining characters of the name you want.
8. To save the patchs new name, press the WRITE button twice.