Patch Chain allows you to scroll through the patches of your choice in a specific order. The HPD-15 lets you create and store 10 chains with up to 32 steps in each. Use the following steps to setup a Patch Chain:
1. Press CHAIN so it is lit.
2. Press EDIT so it is lit.
3. Press the GROUP (-) button to select chain # 1 if necessary.
4. Turn the PATCH/VALUE dial to select the desired patch that will be used first in the chain.
5. Press the PATCH NUMBER ^ (up) button to move to the next step.
6. Turn the PATCH/VALUE dial to select the next patch.
7. Repeat steps 5-6 for the remainder of the chain.
8. Press EXIT, and you will return to Chain Play mode.
9. Now turn the PATCH/VALUE dial to scroll through your new chain.
10. When you are finished with Chain Mode press EXIT.
1. Press CHAIN so it is lit.
2. Press EDIT so it is lit.
3. Press the GROUP (-) button to select chain # 1 if necessary.
4. Turn the PATCH/VALUE dial to select the desired patch that will be used first in the chain.
5. Press the PATCH NUMBER ^ (up) button to move to the next step.
6. Turn the PATCH/VALUE dial to select the next patch.
7. Repeat steps 5-6 for the remainder of the chain.
8. Press EXIT, and you will return to Chain Play mode.
9. Now turn the PATCH/VALUE dial to scroll through your new chain.
10. When you are finished with Chain Mode press EXIT.