The following is a list of PreAmp models for the GT-PRO:
JC CLEAN
JC-120 - This is the sound of the Roland JC-120.
Warm Clean - Gives a mellow, clean sound.
Jazz Combo - A sound suited to jazz.
Full Range - A sound with flat response. Good for acoustic guitar
BrightClean - A bright, clean tone.
TW CLEAN
Clean TWIN - Models a Fender Twin Reverb.
Pro Crunch - Models a Fender Pro Reverb.
Tweed - This Models a Fender Bassman 4 x 10 Combo.
Warm Crunch - Gives a mellow, crunch sound.
CRUNCH
Crunch - A crunch sound that can produce natural distortion.
Blues - A sound suited to blues.
Wild Crunch - A crunch sound with wild distortion.
StackCrunch - A crunch sound with high gain.
VO COMBO
VO Drive - Models the drive sound of a VOX AC-30TB.
VO Lead - Models the lead sound of the VOX AC-30TB.
VO Clean - Models the clean sound of the VOX AC-30TB.
MATCH Drive - Models the sound input to left input on a Matchless D/C-30.
Fat MATCH - Models the sound of a Matchless with a modified high gain.
MATCH Lead - Models the sound input to right input on a Matchless D/C-30.
BG LEAD
BG Lead - This models the lead sound of the MESA/Boogie combo amp.
BG Drive - This models a MESA/Boogie with TREBLE SHIFT SW on.
BG Rhythm - This models the rhythm channel of a MESA/Boogie.
SmoothDrive - This is a smooth drive sound.
Mild Drive - This is a mellow drive sound.
MS STACK
MS1959 (I) - This models the sound input to Input I on a Marshall 1959.
MS1959 (II) - This models the sound input to Input II on a Marshall 1959.
MS1959 (I+II) - This models the sound of a Marshall 1959 with Inputs I and II connected in parallel.
MS HiGain - This models the sound of a Marshall with a modified midrange boost.
Power Stack - This provides the sound of a stack amp with active type tone circuitry.
R-FIER
R-FIER Cln - Models the sound of the Channel 1 CLEAN Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Raw - Models the sound of the Channel 2 RAW Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Vnt1 - Models the sound of the Channel 2 VINTAGE Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Mdn1 - Models the sound of the Channel 2 MODERN Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Vnt2 - Models the sound of the Channel 3 VINTAGE Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Mdn2 - Models the sound of the Channel 3 MODERN Mode on the MESA/Boogie DUAL Rectifier.
T-AMP
T-AMP Clean - This models a Hughes & Kettner Triamp AMP1.
T-AMP Crunch - This models a Hughes & Kettner Triamp AMP2.
T-AMP Lead - This models a Hughes & Kettner Triamp AMP3.
Edge Lead - A sharp lead sound.
HiGAIN
SLDN - This models a Soldano SLO-100.
Drive Stack - This is a drive sound with high gain.
Lead Stack - This is a lead sound with high gain.
Heavy Lead - A powerful lead sound featuring extreme distortion.
METAL
5150 Drive - This models the lead channel of a Peavey EVH 5150.
Metal Stack - This is a drive sound suited to metal.
Metal Lead - This is a lead sound suited to metal.
CUSTOM/FONT
Custom1 - Used for creating and storing your own custom amp model.
Custom2 - Used for creating and storing your own custom amp model.
Custom3 - Used for creating and storing your own custom amp model.
JC CLEAN
JC-120 - This is the sound of the Roland JC-120.
Warm Clean - Gives a mellow, clean sound.
Jazz Combo - A sound suited to jazz.
Full Range - A sound with flat response. Good for acoustic guitar
BrightClean - A bright, clean tone.
TW CLEAN
Clean TWIN - Models a Fender Twin Reverb.
Pro Crunch - Models a Fender Pro Reverb.
Tweed - This Models a Fender Bassman 4 x 10 Combo.
Warm Crunch - Gives a mellow, crunch sound.
CRUNCH
Crunch - A crunch sound that can produce natural distortion.
Blues - A sound suited to blues.
Wild Crunch - A crunch sound with wild distortion.
StackCrunch - A crunch sound with high gain.
VO COMBO
VO Drive - Models the drive sound of a VOX AC-30TB.
VO Lead - Models the lead sound of the VOX AC-30TB.
VO Clean - Models the clean sound of the VOX AC-30TB.
MATCH Drive - Models the sound input to left input on a Matchless D/C-30.
Fat MATCH - Models the sound of a Matchless with a modified high gain.
MATCH Lead - Models the sound input to right input on a Matchless D/C-30.
BG LEAD
BG Lead - This models the lead sound of the MESA/Boogie combo amp.
BG Drive - This models a MESA/Boogie with TREBLE SHIFT SW on.
BG Rhythm - This models the rhythm channel of a MESA/Boogie.
SmoothDrive - This is a smooth drive sound.
Mild Drive - This is a mellow drive sound.
MS STACK
MS1959 (I) - This models the sound input to Input I on a Marshall 1959.
MS1959 (II) - This models the sound input to Input II on a Marshall 1959.
MS1959 (I+II) - This models the sound of a Marshall 1959 with Inputs I and II connected in parallel.
MS HiGain - This models the sound of a Marshall with a modified midrange boost.
Power Stack - This provides the sound of a stack amp with active type tone circuitry.
R-FIER
R-FIER Cln - Models the sound of the Channel 1 CLEAN Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Raw - Models the sound of the Channel 2 RAW Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Vnt1 - Models the sound of the Channel 2 VINTAGE Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Mdn1 - Models the sound of the Channel 2 MODERN Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Vnt2 - Models the sound of the Channel 3 VINTAGE Mode on the MESA/Boogie DUAL Rectifier.
R-FIER Mdn2 - Models the sound of the Channel 3 MODERN Mode on the MESA/Boogie DUAL Rectifier.
T-AMP
T-AMP Clean - This models a Hughes & Kettner Triamp AMP1.
T-AMP Crunch - This models a Hughes & Kettner Triamp AMP2.
T-AMP Lead - This models a Hughes & Kettner Triamp AMP3.
Edge Lead - A sharp lead sound.
HiGAIN
SLDN - This models a Soldano SLO-100.
Drive Stack - This is a drive sound with high gain.
Lead Stack - This is a lead sound with high gain.
Heavy Lead - A powerful lead sound featuring extreme distortion.
METAL
5150 Drive - This models the lead channel of a Peavey EVH 5150.
Metal Stack - This is a drive sound suited to metal.
Metal Lead - This is a lead sound suited to metal.
CUSTOM/FONT
Custom1 - Used for creating and storing your own custom amp model.
Custom2 - Used for creating and storing your own custom amp model.
Custom3 - Used for creating and storing your own custom amp model.