It is possible to control the arranger function from an external MIDI device. The Note-To-Arranger (NTA) Channel is set to MIDI Channel 14. By default, this function is turned on.
Use the following procedure to check the status of the NTA function:
1. Press FUNCTION so it is lit.
2. Use the FAMILY CURSORS to select MIDI in the display.
3. Use the SELECT CURSORS to select NTA Rx14.
4. Use the TEMPO/YES/NO CURSORS to select ON or OFF.
5. Press EXIT to exit.
NOTE: The NTA ON or OFF setting will be remembered even after the keyboard is turned off.
NOTE: The external MIDI device you are using needs to be set to transmit on MIDI Channel 14.
Use the following procedure to check the status of the NTA function:
1. Press FUNCTION so it is lit.
2. Use the FAMILY CURSORS to select MIDI in the display.
3. Use the SELECT CURSORS to select NTA Rx14.
4. Use the TEMPO/YES/NO CURSORS to select ON or OFF.
5. Press EXIT to exit.
NOTE: The NTA ON or OFF setting will be remembered even after the keyboard is turned off.
NOTE: The external MIDI device you are using needs to be set to transmit on MIDI Channel 14.