Use the following procedure to assign a function to an attached footswitch:
1. Press F5 to return to the MASTER display.
2. Press F2 PARAM.
3. Press Press F3 CNTRL.
4. Turn the LOWER NUMBER knob under the display to select the desired footswitch function.
5. Press F% EXIT to return to the MASTER display.
1. Press F5 to return to the MASTER display.
2. Press F2 PARAM.
3. Press Press F3 CNTRL.
4. Turn the LOWER NUMBER knob under the display to select the desired footswitch function.
5. Press F% EXIT to return to the MASTER display.