Use the following procedure to split the keyboard and select Tones for the left and right sections:
1. Under ZONE SWITCH, press the four part buttons so that UPPER 1 is lit and the others are not lit.
2. Use the TONE SELECT buttons to select a tone for the right side of the keyboard.
3. Press SPLIT so it is lit.
4. Use the UP / DOWN CURSOR buttons to select "LW1" in the display.
5. Use the TONE SELECT buttons to select a tone for the left side of the keyboard.
NOTE: To change the tones used by the UPPER1 or LOWER1 again, use the UP / DOWN CURSOR buttons to select either "UP1" or "LW1" in the display and then change the Tone selected for that part.
1. Under ZONE SWITCH, press the four part buttons so that UPPER 1 is lit and the others are not lit.
2. Use the TONE SELECT buttons to select a tone for the right side of the keyboard.
3. Press SPLIT so it is lit.
4. Use the UP / DOWN CURSOR buttons to select "LW1" in the display.
5. Use the TONE SELECT buttons to select a tone for the left side of the keyboard.
NOTE: To change the tones used by the UPPER1 or LOWER1 again, use the UP / DOWN CURSOR buttons to select either "UP1" or "LW1" in the display and then change the Tone selected for that part.