Use the following procedure to assign a pedal to switch the Rotary Speed of the Rotary Effect:
1. Press SYSTEM so it is lit.
2. Press the PART 3/11 button so it is flashing.
3. CURSOR to display "CONTROL PEDAL."
4. CURSOR to "ASSIGN."
5. Use the VALUE dial to set "ASSIGN" to "CC04: FOOT-TYPE."
6. Press PATCH so it is lit.
7. Use the VALUE dial to select "PR-A:054 ROCKER SPIN."
8. Press EDIT so it is lit.
9. Press the PART 2/10 button so it is flashing.
10. CURSOR to display "PATCH EFX CTRL."
11. CURSOR to "SPEED."
12. Use the VALUE dial to set "SPEED" to "FOOT:+63."
13. Press EXIT.
14. Connect a footswitch to the "CONTROL PEDAL" jack.
NOTE: Use a Roland DP-2, DP-6 or DP-8 footpedal.
NOTE: Be sure to WRITE your settings into a USER PATCH.
1. Press SYSTEM so it is lit.
2. Press the PART 3/11 button so it is flashing.
3. CURSOR to display "CONTROL PEDAL."
4. CURSOR to "ASSIGN."
5. Use the VALUE dial to set "ASSIGN" to "CC04: FOOT-TYPE."
6. Press PATCH so it is lit.
7. Use the VALUE dial to select "PR-A:054 ROCKER SPIN."
8. Press EDIT so it is lit.
9. Press the PART 2/10 button so it is flashing.
10. CURSOR to display "PATCH EFX CTRL."
11. CURSOR to "SPEED."
12. Use the VALUE dial to set "SPEED" to "FOOT:+63."
13. Press EXIT.
14. Connect a footswitch to the "CONTROL PEDAL" jack.
NOTE: Use a Roland DP-2, DP-6 or DP-8 footpedal.
NOTE: Be sure to WRITE your settings into a USER PATCH.