You can save and call up the panel settings for sounds
you create with the LEAD channel. This feature is called "SOLO".
1. Create the desired sound by editing the LEAD channel settings.
2. Set the SOLO volume at 0.
Note: (If the SOLO volume is set high, the sound may be unexpectedly loud when the panel settings are saved).
3. Press and hold the SOLO switch on the panel until the
LED begins to flash. The LED stops flashing, when the settings are saved.
4. Adjust the desired volume for the SOLO feature.
Note: The VOLUME setting for the LEAD channel or the LOOPER settings are not saved in the SOLO feature.
you create with the LEAD channel. This feature is called "SOLO".
1. Create the desired sound by editing the LEAD channel settings.
2. Set the SOLO volume at 0.
Note: (If the SOLO volume is set high, the sound may be unexpectedly loud when the panel settings are saved).
3. Press and hold the SOLO switch on the panel until the
LED begins to flash. The LED stops flashing, when the settings are saved.
4. Adjust the desired volume for the SOLO feature.
Note: The VOLUME setting for the LEAD channel or the LOOPER settings are not saved in the SOLO feature.