Use the following procedure to adjust the pan and level of each instrument in
the SPD-11:
1) Press EDIT.
2) Press SELECT until the light under SOUND is lit.
3) Use the up/down arrows to select the parameters PAN and LEVEL.
4) Use the PATCH/VALUE buttons to change the value.
5) Press EDIT to return to play mode.
the SPD-11:
1) Press EDIT.
2) Press SELECT until the light under SOUND is lit.
3) Use the up/down arrows to select the parameters PAN and LEVEL.
4) Use the PATCH/VALUE buttons to change the value.
5) Press EDIT to return to play mode.