Track Copy allows you to copy a specific part of data and then place it in a different location. You can perform editing operations such as copying the data on a track all at once, or copying the data from a specified part as many times as you wish.
If, for example, you want to use a phrase from a certain track, or have the same phrase repeated again and again, the copy function will help save you time.
NOTE: * If data exists at the position being copied to, that data will be overwritten.
NOTE: * The portion being copied must be longer than 1.0 seconds long. If the copied portion is 1.0 seconds or less, no sound will be heard even if the copy is carried out.
The three types of Track Copy are given below:
COPYING THE REPEATED PORTION (AB)
1. Press [UTILITY].
2. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
3. Press CURSOR [<] or [>] to move the cursor to "CPY," and press [ENTER].
4. Turn the TIME/VALUE dial to select "AB" and press [ENTER].
5. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to copy from, and track/VTrack to copy to.
6. Press [ENTER].
7. Use [CURSOR] and turn the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the copied data to be placed.
8. Press [ENTER].
9. Turn the TIME/VALUE dial to select the number of copies you want to be placed.
10. When you are ready to execute the copy, press [ENTER]. The display will ask Are you sure?, so that you can confirm the operation.
11. Press [ENTER]. The copy is executed.
12. Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.
COPYING BY SPECIFYING THE TIME (TME/MES)
Perform the procedure given below to copy the portion between specific times:
1. Press [UTILITY].
2. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
3. Press CURSOR [<] or [>] to move the cursor to "CPY," and press [ENTER].
4. Turn the TIME/VALUE dial to select "TME/MES" and press [ENTER].
5. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to copy from, and track/VTrack to copy to.
6. Press [ENTER].
7. Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion "S" (Start) of data you want to copy.
8. Press [ENTER].
9. Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion "E" (End) of data you want to copy.
10. Press [ENTER].
11. Use [CURSOR] and the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the copied data to be placed.
12. Press [ENTER].
13. Turn the TIME/VALUE dial to select the number of copies you want to be placed.
14. When you are ready to execute the copy, press [ENTER]. The display will ask Are you sure?, so that you can confirm the operation.
15. Press [ENTER]. The copy is executed.
16. Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.
NOTE: After specifying the time in the procedure above, a "+" may appear to show that there is a discrepancy between the actual current position and the position displayed. If you specify the locations using measures, specify the locations at each screen using the TIME/VALUE dial to eliminate the discrepancy.
NOTE: You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].
If, for example, you want to use a phrase from a certain track, or have the same phrase repeated again and again, the copy function will help save you time.
NOTE: * If data exists at the position being copied to, that data will be overwritten.
NOTE: * The portion being copied must be longer than 1.0 seconds long. If the copied portion is 1.0 seconds or less, no sound will be heard even if the copy is carried out.
The three types of Track Copy are given below:
COPYING THE REPEATED PORTION (AB)
1. Press [UTILITY].
2. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
3. Press CURSOR [<] or [>] to move the cursor to "CPY," and press [ENTER].
4. Turn the TIME/VALUE dial to select "AB" and press [ENTER].
5. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to copy from, and track/VTrack to copy to.
6. Press [ENTER].
7. Use [CURSOR] and turn the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the copied data to be placed.
8. Press [ENTER].
9. Turn the TIME/VALUE dial to select the number of copies you want to be placed.
10. When you are ready to execute the copy, press [ENTER]. The display will ask Are you sure?, so that you can confirm the operation.
11. Press [ENTER]. The copy is executed.
12. Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.
COPYING BY SPECIFYING THE TIME (TME/MES)
Perform the procedure given below to copy the portion between specific times:
1. Press [UTILITY].
2. Press CURSOR [<] or [>] to move the cursor to "TRK," and press [ENTER].
3. Press CURSOR [<] or [>] to move the cursor to "CPY," and press [ENTER].
4. Turn the TIME/VALUE dial to select "TME/MES" and press [ENTER].
5. Use CURSOR [<] or [>] and the TIME/VALUE dial to select the track/V-Track to copy from, and track/VTrack to copy to.
6. Press [ENTER].
7. Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion "S" (Start) of data you want to copy.
8. Press [ENTER].
9. Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion "E" (End) of data you want to copy.
10. Press [ENTER].
11. Use [CURSOR] and the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the copied data to be placed.
12. Press [ENTER].
13. Turn the TIME/VALUE dial to select the number of copies you want to be placed.
14. When you are ready to execute the copy, press [ENTER]. The display will ask Are you sure?, so that you can confirm the operation.
15. Press [ENTER]. The copy is executed.
16. Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.
NOTE: After specifying the time in the procedure above, a "+" may appear to show that there is a discrepancy between the actual current position and the position displayed. If you specify the locations using measures, specify the locations at each screen using the TIME/VALUE dial to eliminate the discrepancy.
NOTE: You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].