Use the following steps to set the trigger type for a pad (external trigger) in the TD-10:
1. Press SETUP.
2. Press F1 (BANK).
3. Hit the pad or use the CURSOR buttons to select the trigger input that you wish to select the Trigger Type for.
4. Turn the VALUE dial to select the Trigger Type (i.e. for a PD-120, select "12A." For an acoustic bass drum trigger, select "KIK."
5. Repeat Steps 3 and 4 for any remaining pads if necessary.
6. Press EXIT when you're finished. The new settings are saved automatically.
1. Press SETUP.
2. Press F1 (BANK).
3. Hit the pad or use the CURSOR buttons to select the trigger input that you wish to select the Trigger Type for.
4. Turn the VALUE dial to select the Trigger Type (i.e. for a PD-120, select "12A." For an acoustic bass drum trigger, select "KIK."
5. Repeat Steps 3 and 4 for any remaining pads if necessary.
6. Press EXIT when you're finished. The new settings are saved automatically.