RD-300GX: Adjusting The RD-300GX Master Volume

Use the following procedure to adjust the RD-300GX master volume control:

1. Press EDIT so it is lit.

2. Use the INC / DEC buttons to display "System."

3. Press ENTER.

4. Use the INC / DEC buttons to display "Master Volume."

5. Press ENTER.

6. Use the INC / DEC buttons to adjust the volume.

NOTE: The volume range is 0 to 127.

7. If you wish to make this change permanent, press the WRITE button to display "Are you sure?"

8. Press the flashing ENTER button to display "Executing..."

NOTE: The setting is now saved and will be remembered the next time you turn on the keyboard.

9. Press EXIT several times to return to the main display.