Use the following procedure to set up an external Overdrive/Distortion within the Send/Return loop of the GT-3:
Note: This example uses the BOSS MT-2 distortion pedal.
1. Connect the SEND on the GT-3 to the Input of the MT-2.
2. Connect the Output of the MT-2 to the RETURN on the GT-3.
3. Press the OD/DS button on the GT-3 so it is lit.
4. Press PARAMETER right to select "Overdrive/Dist Type."
5. Turn the VALUE dial clockwise to select "EXT OD/DS." (This turns on the ext. loop).
6. Press the WRITE button to store the new settings to a User Patch.
Note: You need turn on the ext. loop for each user patch.
Note: This example uses the BOSS MT-2 distortion pedal.
1. Connect the SEND on the GT-3 to the Input of the MT-2.
2. Connect the Output of the MT-2 to the RETURN on the GT-3.
3. Press the OD/DS button on the GT-3 so it is lit.
4. Press PARAMETER right to select "Overdrive/Dist Type."
5. Turn the VALUE dial clockwise to select "EXT OD/DS." (This turns on the ext. loop).
6. Press the WRITE button to store the new settings to a User Patch.
Note: You need turn on the ext. loop for each user patch.