Use the following procedure to change the FP-2 USB settings:
1. While holding down both the - and + buttons, turn the FP-2 on.
2. Use the - and + buttons to select the USB setting.
NOTE:
"udr" = (vendor) Use this setting when using Roland's USB drivers for your OS.
"GEn" = (generic) Use this setting when using the generic USB driver supplied with your computer.
3. Turn the FP-2 off and back on again.
1. While holding down both the - and + buttons, turn the FP-2 on.
2. Use the - and + buttons to select the USB setting.
NOTE:
"udr" = (vendor) Use this setting when using Roland's USB drivers for your OS.
"GEn" = (generic) Use this setting when using the generic USB driver supplied with your computer.
3. Turn the FP-2 off and back on again.