Fantom-X6, Fantom-X7, Fantom-X8: Writing a Sample into Memory

Newly recorded samples must be saved to memory before turning off the Fantom-X; otherwise, the sample will be lost. Follow the procedure below to save a sample:

1. Press SAMPLE LIST so it's lit.
2. Turn VALUE to select the desired sample. 
3. Press WRITE. 
4. Press F3 (Sample). 
5. Use the VALUE dial and CURSOR buttons to name the sample.
6. Press F8 (Write).
7. Press F2 to select Userif youre using a memory card, press F3 to select Card.
8. Turn the VALUE dial to select a destination for the sample.
9. Press F8 (Write).
10. Press F8 (Exec).