Once you've backed up your project, or if you decide you no longer want the project on the hard drive, you can simply erase it.
1. Hold down SHIFT and press F4[PROJECT].
2. Cursor to the desired project and press F6 for "Mark" to select that project.
3. If "ERASE" isn't visible above F2, press PAGE until it is.
4. Press F2 for "ERASE".
5. The message will be displayed, " All Selected Project Data will be erased. Are you sure?" Press the ENTER[YES] button to continue with the erase, or EXIT[NO] to cancel.
6. Since erase is irreversible, the message will be displayed again, " All Selected Project Data will be erased. Are you really sure?" Press the ENTER[YES] button to continue with the erase, or EXIT[NO] to cancel.
1. Hold down SHIFT and press F4[PROJECT].
2. Cursor to the desired project and press F6 for "Mark" to select that project.
3. If "ERASE" isn't visible above F2, press PAGE until it is.
4. Press F2 for "ERASE".
5. The message will be displayed, " All Selected Project Data will be erased. Are you sure?" Press the ENTER[YES] button to continue with the erase, or EXIT[NO] to cancel.
6. Since erase is irreversible, the message will be displayed again, " All Selected Project Data will be erased. Are you really sure?" Press the ENTER[YES] button to continue with the erase, or EXIT[NO] to cancel.