To enable the use of a VS8F-3 expansion board on a 1680,1880 or 1824 you will need to turn the VS8F-3 SW to on, using the following procedure:
1)While holding down SHIFT, press F5(SYSTEM)
2)Press F1 (SYSPM)
3)CURSOR to VS8F-3 Use SW.
4)Turn the TIME/VALUE wheel to select ON
5)Press ENTER/YES
6)Perform the Shutdown Procedure.
Note: Enabling the VS8F-3 SW will disable tracks 15 and 16.
1)While holding down SHIFT, press F5(SYSTEM)
2)Press F1 (SYSPM)
3)CURSOR to VS8F-3 Use SW.
4)Turn the TIME/VALUE wheel to select ON
5)Press ENTER/YES
6)Perform the Shutdown Procedure.
Note: Enabling the VS8F-3 SW will disable tracks 15 and 16.