There are some instances where it may be desired to have the ME-50 connected to the Effects SEND and RETURN loop of an Amplifier. Use the following connection set up for this application:
1. Turn the volume down on the amp and make sure the ME-50's power is OFF.
2. Connect one end of the guitar cable to the SEND on the amplifier, and the opposite end to the INPUT on the ME-50.
3. Connect one end of another guitar cable to the RETURN of the amplifier, and the opposite end to the OUTPUT L(MONO) of the ME-50.
4. Now, with another cable, connect the guitar to the front INPUT on the Amp.
5. Turn ON the ME-50.
6. Adjust volume on both the Amp and the ME-50 as desired.
1. Turn the volume down on the amp and make sure the ME-50's power is OFF.
2. Connect one end of the guitar cable to the SEND on the amplifier, and the opposite end to the INPUT on the ME-50.
3. Connect one end of another guitar cable to the RETURN of the amplifier, and the opposite end to the OUTPUT L(MONO) of the ME-50.
4. Now, with another cable, connect the guitar to the front INPUT on the Amp.
5. Turn ON the ME-50.
6. Adjust volume on both the Amp and the ME-50 as desired.