There are 150 preset patterns in the TD-12's sequencer. Use the following steps to select and play them:
1. Press PATTERN so it's lit.
2. Turn the VALUE dial to select one of the preset patterns.
3. Press PLAY.
4. Press STOP when you're finished.
Note: If you select a TAP pattern, press the PLAY button repeatedly to move, or "tap", through the pattern. Tap patterns are identified by ">|>|" shown below the "P" in the display.
1. Press PATTERN so it's lit.
2. Turn the VALUE dial to select one of the preset patterns.
3. Press PLAY.
4. Press STOP when you're finished.
Note: If you select a TAP pattern, press the PLAY button repeatedly to move, or "tap", through the pattern. Tap patterns are identified by ">|>|" shown below the "P" in the display.