The signal in the GT-PRO can be routed to the different outputs (MAIN / SUB) as desired. This can be assigned per patch, or even globally. Use the following steps to assign the outputs globally:
1. Press OUTPUT SELECT.
2. Press PARAMETER Right (>) to until you see "Output Channel."
3. Turn the VALUE dial to choose the desired setting;
PATCH: Signals are output according to the selected setting in the patch's Master Output setting (refer to page #55 in the GT-Pro manual).
MAIN: Signals are output from the MAIN OUT jacks.
SUB: Signals are output from the SUB OUT jacks.
MAIN + SUB: Signals are output from both the MAIN OUT and SUB OUT jacks.
4. Press EXIT when you're finished. The setting is saved automatically.
1. Press OUTPUT SELECT.
2. Press PARAMETER Right (>) to until you see "Output Channel."
3. Turn the VALUE dial to choose the desired setting;
PATCH: Signals are output according to the selected setting in the patch's Master Output setting (refer to page #55 in the GT-Pro manual).
MAIN: Signals are output from the MAIN OUT jacks.
SUB: Signals are output from the SUB OUT jacks.
MAIN + SUB: Signals are output from both the MAIN OUT and SUB OUT jacks.
4. Press EXIT when you're finished. The setting is saved automatically.