If the Ambience is on in a drum kit, the level can be adjusted individually for each pad. Use the following steps to do so:
1. Press the STUDIO button.
2. Press F4(AMBNCE).
3. Press F1(AMBSND).
Tip: If the TDW-1 expansion is installed in the TD-10, you can replace steps 1-3 above by holding SHIFT(KIT) and pressing CONTROL ROOM.
4. Hit the pad, or portion of the pad (i.e. head/rim) that you want to adjust the Ambience level for.
5. Turn the VALUE dial to adjust the level (0-127).
6. Repeat steps 4-5 for any remaining pads if desired.
7. Press KIT when you're finished. The new settings are stored automatically.
1. Press the STUDIO button.
2. Press F4(AMBNCE).
3. Press F1(AMBSND).
Tip: If the TDW-1 expansion is installed in the TD-10, you can replace steps 1-3 above by holding SHIFT(KIT) and pressing CONTROL ROOM.
4. Hit the pad, or portion of the pad (i.e. head/rim) that you want to adjust the Ambience level for.
5. Turn the VALUE dial to adjust the level (0-127).
6. Repeat steps 4-5 for any remaining pads if desired.
7. Press KIT when you're finished. The new settings are stored automatically.