Use the following steps to activate the Sound on Sound feature in the GT-6B:
1. Choose a desired patch to edit.
2. Press the REV/DLY button (not the REV/DLY pedal).
3. Turn the VALUE dial so that "Sound on Sound SOS" shows in the display.
4. The BYPASS/CTL pedal will now perform as the REC/PLAY/OVERDUB pedal, and the REV/DLY/SOS pedal will perform as the STOP/CLEAR pedal.
5. When you're ready to record, press the REC/PLAY/OVERDUB pedal and play your bass. In "high quality" mode you get about 3 seconds of recording time.
6. Use the REV/DLY/SOS and REC/PLAY/OVERDUB to stop and play back your new loop.
1. Choose a desired patch to edit.
2. Press the REV/DLY button (not the REV/DLY pedal).
3. Turn the VALUE dial so that "Sound on Sound SOS" shows in the display.
4. The BYPASS/CTL pedal will now perform as the REC/PLAY/OVERDUB pedal, and the REV/DLY/SOS pedal will perform as the STOP/CLEAR pedal.
5. When you're ready to record, press the REC/PLAY/OVERDUB pedal and play your bass. In "high quality" mode you get about 3 seconds of recording time.
6. Use the REV/DLY/SOS and REC/PLAY/OVERDUB to stop and play back your new loop.