Note: This article refers to the BOSS MICRO BR® Digital Recorder that was released in 2006. If you're looking for information on the 2011 MICRO BR® BR-80 Digital Recorder, please click this link:
MICRO BR® BR-80.
Although the Micro BR is a four-track recorder, and therefore capable of four tracks of simultaneous playback, each track does actually consist of eight V-Tracks (virtual tracks.)
The first audio you record on any of the four tracks is V-Track 1 (TR1-V). If you record a take and decide that you want to record an alternate take without erasing the first one, you can change the V-Track for the track and then record a new take on the new V-Track. You can later decide which is the best take for playback, or you can copy the best part of each V-Track to a completely new one.
You're also using V-Tracks when you mix and bounce your four tracks down to stereo. You'll notice that when you first go to Bounce mode, the destination for your bounce is TR12 V-2.
To change a V-Track, use the following steps.
1. Press TR1.
2. Cursor to the right several times to access the VTrack screen.
3. Select the desired track by pressing its TR1,TR2,TR3, or TR4 button.
4. Use the VALUE buttons to switch to an unused V-Track.
Note: A filled square indicates that a V-Track already contains data. An empty square indicates an empty V-Track.
5. Press EXIT.
MICRO BR® BR-80.
Although the Micro BR is a four-track recorder, and therefore capable of four tracks of simultaneous playback, each track does actually consist of eight V-Tracks (virtual tracks.)
The first audio you record on any of the four tracks is V-Track 1 (TR1-V). If you record a take and decide that you want to record an alternate take without erasing the first one, you can change the V-Track for the track and then record a new take on the new V-Track. You can later decide which is the best take for playback, or you can copy the best part of each V-Track to a completely new one.
You're also using V-Tracks when you mix and bounce your four tracks down to stereo. You'll notice that when you first go to Bounce mode, the destination for your bounce is TR12 V-2.
To change a V-Track, use the following steps.
1. Press TR1.
2. Cursor to the right several times to access the VTrack screen.
3. Select the desired track by pressing its TR1,TR2,TR3, or TR4 button.
4. Use the VALUE buttons to switch to an unused V-Track.
Note: A filled square indicates that a V-Track already contains data. An empty square indicates an empty V-Track.
5. Press EXIT.