Use the following steps to copy a kit in the TD-20:
1. Press COPY.
2. Press F1(KIT).
3. Press CURSOR left.
4. Turn the VALUE dial counterclockwise to select "PRESET."
5. Press CURSOR right.
6. Turn the VALUE dial to select the Kit you'd like to copy.
7. Press CURSOR down.
8. Turn the VALUE dial to select a desired location to copy to (1-50).
9. Press F5 (COPY).
10. Press EXIT when you're finished.
1. Press COPY.
2. Press F1(KIT).
3. Press CURSOR left.
4. Turn the VALUE dial counterclockwise to select "PRESET."
5. Press CURSOR right.
6. Turn the VALUE dial to select the Kit you'd like to copy.
7. Press CURSOR down.
8. Turn the VALUE dial to select a desired location to copy to (1-50).
9. Press F5 (COPY).
10. Press EXIT when you're finished.